EZCURB™ Curb Cleaner

• Restores original sheen to acrylic resin-based coatings.
• Removes trapped moisture/blushing from coating.
• Revitalizes & brightens without removing old sealer.
• Multi-use thinning & cleaning solvent.
  

APPLICATION: If you want to re-cure the initial sealer, apply the cleaner by sprayer or roller at about 300 sq. ft/gallon.

Apply to small areas, no bigger than 10'x10' at a time, and let it sit for 5 minutes.

If you need to remove the sealer completely, apply generously at about 100 sq. ft/gallon and let it sit for 5 minutes before scrubbing with a stiff acid brush in a circular motion.

For easier and complete removal, use a pressure washer with hot water capability set at 2000 PSI.

The process may need to be repeated depending on the substrate porosity.

WARNINGS & SAFETY INFORMATION: FLAMMABLE LIQUID AND VAPORS! EXTERIOR USE ONLY

For complete Application directions and Cautions on the use of EZCURB CURB CLEANER, please refer to the data sheets below before using the product:

• Tech Data