EZCURB™ Curb Retarder
$100.00$85.00 with 3+ pails
Part of the Heat Wave pack
The mix, in action
← System Products
EZCURB™ Admixture
$140.0015% off with 3+ pails
5 Gallon Pail · 18.92 L
- Higher compressive strength, superior weathering
- Closed-cell finish with no surface water bleed
- Less shrinkage cracking, improved compaction
- Deeper, more vibrant integral color
Mix and match: 3 or more Heat Wave pails and every pail gets 15% off.
- Free shipping, always
- 30-day money-back guarantee
- Made in-house by Specco Industries
- No calcium chloride, ever
Built to stop curb failures.
You catch it behind the machine, or your client catches it three weeks later. Every one of these starts in the mix. One dose is built to shut down all four.
- BleedingWater sheens up behind the machine and the face never tightens right.The viscosity modifier builds a closed-cell curb with no surface water bleed.
- SegregationAggregate drops out of the paste, edges tear, and the face comes out blotchy.The lubricating plasticizer keeps the mix creamy and compacting as one.
- ShrinkageThe curb dries too fast and pulls itself apart from the inside.5 to 10% water reduction at dose. Less water in means less shrinkage out.
- CrackingThe callback. Three weeks later there is a crack down your best-looking run.The low-range water reducer cures a denser, higher-strength curb that resists it.
Run it by the numbers.
Straight from the Technical Data Sheet. No guesswork in the dose.
8 ozStarting doseper 47 lb half bag of cement
5-10%Water reductiontaken out of the mix at dose
12-16 ozHot-weather doseper half bag when temps climb
45-100°FWorking rangebuilt for warm-weather pours
Hot pours drink more. The dose climbs from 8 oz toward 16 when the heat is on, which is exactly why the Heat Wave runs 15% off 3 or more pails.
No calcium chloride, ever.
Watch the full run-through.
Dosing, mixing and pouring the Admixture, start to finish.
Word from the field.
I've been in business for 23 years and this Admixture seems to work extremely well for me in the Pacific Northwest. Really allows me to use a fine sand and get deep impressions. I place a 5 gallon bucket on my trailer and use a 16oz syringe to suck it out of the bucket. Depending on the type of curbing we are doing we use anywhere between 4-10oz. The product seems to really help my curb cream over and my colors and sealers just pop!
It provides superior structural integrity for our extruded concrete borders.
EZCURB Admix was referred to us a few years ago. We figured we would give it a try and see what all the hype was. Turns out, it's an amazing product! We would recommend it for all Curbers to use. We've seen an increase in the workability of our product.
Runs with.
The other two thirds of the pour.
EZCURB™ Curb Finishing Aid
$80.00$68.00 with 3+ pails
